Mini Fan pro / HET 2W23

Item number: MF 2W23

69 mm ducted fan 5s Lipo, 45 A, 13.5 N thrust
completely mounted, checked, precision balanced and harmonically tuned.

Category: Mini Fan pro combos


109,90 €

including 19% VAT. , plus shipping

Recommended retail price: 109,90 €
Not available now!

Delivery status: 1 week

Shipping time: 2 - 3 workdays



For 5s Lipo, 45 A, 13.5 N of thrust

This is amild 5s setup for models weighing 1.2 - 1.7 kg.
Since current can reach up to 50 A readily installed, we recommend 2.600 mAh cells 30 C or better and a good 60 A speed controller. Throttle management is recommended to reach a good flying time.

The motor is a 6 pole motor turning more than 40.000 rpm. So only speed controllers that can switch more than 120.000 times / minute are suitable.

The fan unit comes completely mounted with a HET 2W23 motor.
The unit is assembled and checked at factory, precision balanced and harmonically tuned.

Set comprises:
1 x Mini Fan pro ducted fan unit with optional intake lip
1 x HET 2W23 motor
 inner diameter:  69,0 mm
 outer diameter:  72 mm
 length of shroud:  59 mm
 weight, complete:  160 grams w/o lip (+14 g)
 fan swept area:  29.4 qcm
 rotor:  5-blades, Nylon (glass reinforced)
 power input approx.  840 W
 thrust:  13.5 N (approx. 1.35 kg)
 rec. battery:  5s lipo, from 2.600 mAh 30C or better
 rec. thrust tube dia.:  56 mm diameter
 Timing ESC:  approx. 12
 PWM:   8-12 kHz


Readings: 
We measure with a constant voltage of 3.7 V / cell. 
Current and thrust are measured with a small intake lip (r=6 mm) at 21 C, 50m asl and standard pressure.
Depending on battery, controller and installation you may see higher or lower figures.

Shipping weight: 0,30 Kg
Product weight: 0,20 Kg

Average product review

Share your experience with other customers: