Mini Fan pro / HET 2W

Item number: MF 2W

69 mm ducted fan 3s Lipo, 55 A, 10.5N thrust
completely mounted, checked, precision balanced and harmonically tuned.

Category: Mini Fan pro combos


99,90 €

including 19% VAT. , plus shipping

Recommended retail price: 99,90 €
Not available now!

Delivery status: 1 week

Shipping time: 2 - 3 workdays



For 3s Lipo, 55 A, 10.5 N of thrust

This is a very light yet power 3s drive. It comes for example with the Viperjet by Tomahawk Design, but can be equally used with most models weighing 1 - 1.5 kg.
Since current can reach up to 60 A readily installed, we recommend 3.600 mAh cells 30 C or better and a good 80 A speed controller. Throttle management is recommended to reach a good flying time.

The motor is a 6 pole motor turning more than 40.000 rpm. So only speed controllers that can switch more than 120.000 times / minute are suitable.

The fan unit comes completely mounted with a HET 2W motor.
The unit is assembled and checked at factory, precision balanced and harmonically tuned.

Set comprises:
1 x Mini Fan pro ducted fan unit with optional intake lip
1 x HET 2W motor
 inner diameter:  69,0 mm
 outer diameter:  72 mm
 length of shroud:  59 mm
 weight, complete:  133 grams (w/o intake lip = + 14 g)
 fan swept area:  29.4 qcm
 rotor:  5-blades, Nylon (glass reinforced)
 power input approx.  610 W
 thrust:  10.5 N (approx. 1.05 kg)
 rec. battery:  3s lipo, from 3.600 mAh 30C or better
 rec. thrust tube dia.:  56 mm diameter
 Timing ESC:  approx. 12
 PWM:   8-12 kHz


Readings: 
We measure with a constant voltage of 3.7 V / cell. 
Current and thrust are measured with a small intake lip (r=6 mm) at 21 C, 50m asl and standard pressure.
Depending on battery, controller and installation you may see higher or lower figures.

Shipping weight: 0,30 Kg
Product weight: 0,20 Kg

Average product review

Write your first review and help others with their purchase decision:


Other customers have also bought the following items