CNC cut parts for the model
Jetbrett EDF designed by Wolfgang Wehrling.
This set contains all CNC cut parts like ribs, formers, fuselage walls and vertical tail.
NOT included is wood for wing sheeting and stripwood.
A list of additinally needed wood is printed in FMT issue 10/13, which contains the 1:1 plan as well. (The magazine is only available in german language!)
The plan is NOT part of this set.
"Jetbrett EDF" with its fan in the tail is an easy to fly yet fast flying wing. The model spans about 1.15 m and can be flown either iwth a 3 or 4 s drive. The 4s version was measured beyond 200 km/h in horizontal flight.
The model was designed as a team effort By Wolgang Wehrling and Tim Kleinschmidt, with a little help of WeMoTec.
Technical specs:Wing span: 1150 mm
Length: 810 mm
Wing section: MH 63 mod
Flying weight: 920-1080 grams (3-4s Lipo)
RC functions: Elevator, Aileron, ESC
Recommended drive:Mini Fan evo / 2W20
80A controller
Battery 4s Lipo approx. 3.000 - 3.600 mAh
3s flying is possible if you like it with a milder touch, controller 50A, Battery 3s/2.200 mAh
The following Video shows its in flight perfomance:
(Note: The Video shows a prototype with Mini Fan pro and HET 2W18 motor. The new Mini Fan evo with HET 2W20 shows the same perfomance on a further decreased noise level)
