Midi Fan100 evo Impeller / HET 700-75-1050 (12s/98A/62N) completely mounted, fine balanced and harmonically tuned

Item number: MDE100 700-75-1050

100 mm ducted fan unit (11-blades)
12s Lipo cells
6,3 kp of thrust
completely mounted, checked, completely balanced and harmonically tuned

Category: with HET 700-75 motors


233,85 €

including 16% VAT. , plus shipping

Recommended retail price: 239,90 €
(You save 2.52%, that is 6,05 €)
Will be produced after order. Please ask for delivery time

Delivery status: when light is red, approx. 8-10 days from time of order

Shipping time: 2 - 3 workdays



This particular setup is a powerful 12s setup for Sport- and scale jets up to approx. 8 kg AUW.

Modern high efficiency multi bladed fan unit.

The fan unit comes completely mounted with a Het 700-75-1050 motor.
The unit is assembled and checked at factory, precision balanced and harmonically tuned.

Readings
 
12s
 Voltage
44,4 V
 Current
98 A
 Power in
4351 W
 Rpm  
 Thrust
6,3 kp
 Efflux velocity
88,93 m/s
 Efficiency
0,63
 Controller
> 120A / HV
 Battery
5.000-6.500 mAh

The controller should be chosen 20% over rated due to the long lasting load
LV = low voltage controller up to 6s, HV = high voltage controller above 6s
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.

Set comprises:
1 x Midi Fan100 evo ducted fan unit
1 x HET 700-75-1050 + cooling ring
 
 inner diameter: 100,0 mm
 outer diameter: 104,0 mm
 length of shroud:  60 mm, w/o intake lip
 weight, complete: 513 grams
 fan swept area:  64,00 sqcm
 rotor:  11 blades, Nylon (glass reinforced)
 rec. thrust tube dia.:  85 mm diameter
 Timing ESC:  approx. 6 (4-pole motor)
 PWM:  8-12 kHz

Readings: 
We measure with a constant voltage of 3.7 V / cell. 
Current and thrust are measured with a small intake lip (r=6 mm) at 21 C, 50m asl and standard pressure.
Depending on battery, controller and installation you may see higher or lower figures.

Attention:
If not mounted within a proper ducting, the fan nees an intake ring. An intake ring is not part of this set.

Shipping weight: 1,00 Kg
Product weight: 0,90 Kg

Average product review

Write your first review and help others with their purchase decision:

Contact