Midi Fan100 evo Impeller / HET 700-68-1000 (12s / 85A / 56N), completely mounted, fine balanced and harmonically tuned

Item number: MDE100 700-68-1000

100 mm ducted fan unit (11-blades)
12s Lipo cells
5,70 kp of thrust
completely mounted, checked, completely balanced and harmonically tuned

Category: with HET 700-68 motors


224,10 €

including 16% VAT. , plus shipping

Recommended retail price: 229,90 €
(You save 2.52%, that is 5,80 €)
Will be produced after order. Please ask for delivery time

Delivery status: when light is red, approx. 8-10 days from time of order

Shipping time: 2 - 3 workdays



This particular setup is extremely light weight with higher power.
It is typically used in relatively slow models like airliners and scale models, or light faster models.
Twin engined airliners may weigh in at up to 18 kg, and four engined airliners even up to 36 kg.

Modern high efficiency multi bladed fan unit.

The fan unit comes completely mounted with a HET 700-68-1000 motor.
The unit is assembled and checked at factory, precision balanced and harmonically tuned.

Readings
 
12s
 Voltage
44,4 V
 Current
85,0 A
 Power
3774 W
 rpm  
 thrust
5,70 kp
 efflux velocity
84,45 m/s
 efficiency
0,63
 controller
> 100 A / HV
 Battery
4.000-5.500 mAh

The controller should be chosen 20% over rated due to the long lasting load
LV = low voltage controller up to 6s, HV = high voltage controller above 6s
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.

Set comprises:
1 x Midi Fan100 evo ducted fan unit
1 x HET 700-68-1000, with cooling ring

 inner diameter: 100,0 mm
 outer diameter: 104,0 mm
 length of shroud:  60 mm
 weight, complete:  447 grams (incl. cooling ring)
 fan swept area:  64,00 sqcm
 rotor:  11 blades, Nylon (glass reinforced)
 rec. thrust tube dia.:  85 mm diameter
 Timing ESC:  approx. 6 (4-pole motor)
 PWM:  8-12 kHz

Readings: 
We measure with a constant voltage of 3.7 V / cell. 
Current and thrust are measured with a small intake lip (r=6 mm) at 21 C, 50m asl and standard pressure.
Depending on battery, controller and installation you may see higher or lower figures.

Attention:
If not mounted within a proper ducting, the fan nees an intake ring. An intake ring is not part of this set.

Shipping weight: 0,70 Kg
Product weight: 0,60 Kg

Average product review

Write your first review and help others with their purchase decision:

Contact